Service Work On Gearboxes, Axes 3, 4, 5 And 6 - ABB IRB 1600 - 5/1,2 type A Product Manual

4 Repair

4.7.2. Service work on gearboxes, axes 3, 4, 5 and 6

4.7.2. Service work on gearboxes, axes 3, 4, 5 and 6
Gearboxes, replacement
The gearboxes of axes 3, 4, 5 and 6 are intended to run without requiring any repairs or
maintenance work. This implies that they must under no circumstances be opened or
serviced.
If the gearboxes require replacement:
218
•
axes 3 and 4: the complete upper arm is to be replaced. This procedure is detailed in
section Replacement of complete upper arm on page
•
axes 5 and 6: the complete wrist unit is to be replaced. This procedure is detailed in
section Replacement of wrist unit on page
129.
143.
3HAC026660-001 Revision: C