Configuring Subnet Options - Siemens RX1500 User Manual

RUGGEDCOM ROX II
User Guide
4. Click Add to create the new subnet. The Subnet Configuration form appears.
Figure 346: Subnet Configuration Form
1. Network IP Box
5. Configure the following parameter(s) as required:
Parameter
network-ip
shared-network
6. Configure the options for the subnet. For more information, refer to
Options"
7. Click Commit to save the changes or click Revert All to abort. A confirmation dialog box appears. Click OK
to proceed.
8. Click Exit Transaction or continue making changes.
Section 5.15.7.3

Configuring Subnet Options

To configure options for a subnet, do the following:
NOTE
Options set at the subnet level override options set at the DHCP server level.
1. Change the mode to Edit Private or Edit Exclusive.
2. Navigate to services » dhcpserver » subnet » {name} » options, where {name} is the name of the subnet.
The Leased Configuration and Client Configuration forms appear.
Configuring Subnet Options
1
2
2. Shared Network List
Description
The network IP address for this subnet.
The shared-network that this subnet belongs to.
Setup and Configuration
Section 5.15.7.3, "Configuring Subnet
Chapter 5
325