Chapter 5
Setup and Configuration
Figure 291: Local Time Settings Form
1. Enable Check Box
3.
Configure the following parameter(s) as required:
Parameter
Enable
Stratum
4.
Click Commit to save the changes or click Revert All to abort. A confirmation dialog box appears. Click OK
to proceed.
5.
Click Exit Transaction or continue making changes.
Section 5.12.5
Configuring NTP Multicast Clients
The NTP multicast client enables the NTP server to receive advertisements from other NTP servers.
To configure the NTP multicast client, do the following:
Change the mode to Edit Private or Edit Exclusive.
1.
2.
Navigate to services » time » ntp. The NTP Multicast Clients form appears.
282
1
2
2. Stratum Box
Description
Enables the local clock. The NTP daemon will use the local clock as the NTP source.
The stratum number (of 10) indicates the priority relative to other sources.
Default: 10
The stratum number of the local clock.
RUGGEDCOM ROX II
User Guide
Configuring NTP Multicast Clients