Siemens RX1500 User Manual page 376

Chapter 5
Setup and Configuration
NOTE
Options set at the host group level override options set at the DHCP server level.
1. Change the mode to Edit Private or Edit Exclusive.
2. Navigate to services » dhcpserver » host-groups » {host} » options, where {host} is the name of the host
group. The Leased Configuration and Client Configuration forms appear.
Figure 370: Leased Configuration Form
1. Default Box 2. Maximum Box
Figure 371: Client Configuration Form
1. Unknown Client LIst
3. On the Leased Configuration form, configure the following parameters as required:
Parameter
default
maximum
344
1
2
1
2
3
2. Shared Network LIst 3. Subnet LIst
Description
Default: 600
The minimum leased time in seconds that the server offers to the client.
Default: 7200
The maximum leased time in seconds that the server offers to the clients.
RUGGEDCOM ROX II
User Guide
Configuring Host Group Options