Deleting A Redistribution Metric; Managing Routing Interfaces - Siemens RX1500 User Manual

RUGGEDCOM ROX II
User Guide
Parameter
Metric Type
Metric
Route Map
6. Click Commit to save the changes or click Revert All to abort. A confirmation dialog box appears. Click OK
to proceed.
7. Click Exit Transaction or continue making changes.
Section 5.21.8.3

Deleting a Redistribution Metric

To delete a redistribution metric for dynamic OSPF routes, do the following:
Change the mode to Edit Private or Edit Exclusive.
1.
2. Navigate to routing » dynamic » ospf » redistribute. The Redistribute From Other Routing Protocols
table appears.
1
Figure 615: Redistribute From Other Routing Protocols Table
1. Add Button
3. Click Delete next to the chosen metric.
4. Click Commit to save the changes or click Revert All to abort. A confirmation dialog box appears. Click OK
to proceed.
5. Click Exit Transaction or continue making changes.
Section 5.21.9

Managing Routing Interfaces

The following sections describe how to configure and manage routing interfaces for dynamic OSPF routes:
• Section 5.21.9.1, "Viewing a List of Routing Interfaces"
• Section 5.21.9.2, "Configuring a Routing Interface"
Deleting a Redistribution Metric
Description
Default: 2
The OSPF exterior metric type for redistributed routes.
The metric for redistributed routes.
The route map name.
2. Edit Button 3. Delete Button
2 3
Chapter 5
Setup and Configuration
531