Configuring The Device - Siemens SIMATIC NET RUGGEDCOM RSG908C Equipment Manual

Device Management
3.2 Configuring the Device
device's IP address. The factory default IP address for the RUGGEDCOM RSG908C is
https://192.168.0.1.
For more information about available ports, refer to "Communication
Ports" (Page 21).
3.2

Configuring the Device

Once the device is installed and connected to the network, it must be configured.
All configuration management is done via the RUGGEDCOM RSG908C interface.
For more information about configuring the device, refer to the "RUGGEDCOM ROS
Configuration Manual" associated with the installed software release.
20
RUGGEDCOM RSG908C
Equipment Manual, 11/2023, C79000-G8976-1404-15