Viewing The Cdma Network Status For Cellular Modems - Siemens RX1500 User Manual

Ruggedcom rox ii series
Hide thumbs Also See for RX1500:
Table of Contents

Advertisement

RUGGEDCOM ROX II
User Guide
Section 3.23.5

Viewing the CDMA Network Status for Cellular Modems

To view the status of the CDMA network for a cellular modem, navigate to interfaces » cellmodem » {slot/port/
profile} » cdma, where {slot/port/profile} is the slot name, port number and profile configured for the cellular
modem. The 3G CDMA/EVDO Cellular Modem Information form appears.
Figure 149: 3G CDMA/EVDO Cellular Modem Information Form
1. Network Supported
Number
This form provides the following information:
Parameter
network-supported
esn
ecio
rssi-indicator
network-operator
network-in-use
network-status
phone-number
Viewing the CDMA Network Status for Cellular Modems
1
2
3
4
5
6
7
8
2. ESN
3. ECIO
4. RSSI Indicator
Description
Wireless technologies supported by the modem
The Electronic Serial Number of the modem. ESN is only avaible for the CDMA modem.
The total energy per chip per power density value in dBm
The Received Signal Strength Indicator in dBm
The wireless network operator currently in use
The network technology currently in use by the modem
The registration status of the modem with the wireless network
The subscriber phone number of the CDMA modem
5. Network Operator
6. Network In Use
Chapter 3
Device Management
7. Network Status
8. Phone
145

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Rx1501Rx1510Rx1511Rx1512

Table of Contents