Viewing A List Of Custom Client Options; Adding A Custom Client Option - Siemens RX1500 User Manual

RUGGEDCOM ROX II
User Guide
Section 5.15.8.1

Viewing a List of Custom Client Options

To view a list of custom client options configured for a DHCP subnet, navigate to services » dhcpserver »
subnet » {name} » options » client » custom, where {name} is the name of the subnet. The Custom
Configuration table appears.
Figure 353: Custom Configuration Table
If no custom client options have been configured, add options as needed. For more information, refer to
Section 5.15.8.2, "Adding a Custom Client
Section 5.15.8.2

Adding a Custom Client Option

To add a custom client option to a DHCP subnet, do the following:
NOTE
The number of the option (defined by the Internet Assigned Numbers Authority or IANA) and its
allowed value must be known before this custom option can be configured. For more information about
DHCP options, refer to
1. Change the mode to Edit Private or Edit Exclusive.
Navigate to services » dhcpserver » subnet » {name} » options » client » custom, where {name} is the
2.
name of the subnet.
Click <Add custom>. The Key Settings form appears.
3.
Viewing a List of Custom Client Options
Option".
RFC 2132 [http://tools.ietf.org/html/rfc2132].
Chapter 5
Setup and Configuration
331