Deleting An Egress Source Port; Managing Ingress Source Ports; Viewing A List Of Ingress Source Ports - Siemens RX1500 User Manual

Chapter 5
Setup and Configuration
Click Commit to save the changes or click Revert All to abort. A confirmation dialog box appears. Click OK
5.
to proceed.
6. Click Exit Transaction or continue making changes.
Section 5.16.2.3

Deleting an Egress Source Port

To delete an egress source port for port mirroring, do the following:
1. Change the mode to Edit Private or Edit Exclusive.
2. Navigate to switch » port-mirroring » egress-src. The Egress Source Ports table appears.
1
Figure 399: Egress Source Ports Table
1. Add Button 2. Edit Button
3. Click Delete next to the chosen source port.
4. Click Commit to save the changes or click Revert All to abort. A confirmation dialog box appears. Click OK
to proceed.
5. Click Exit Transaction or continue making changes.
Section 5.16.3

Managing Ingress Source Ports

The following sections describe how to configure and manage ingress source ports for port mirroring:
• Section 5.16.3.1, "Viewing a List of Ingress Source Ports"
• Section 5.16.3.2, "Adding an Ingress Source Port"
• Section 5.16.3.3, "Deleting an Ingress Source Port"
Section 5.16.3.1

Viewing a List of Ingress Source Ports

To view a list of ingress source ports for port mirroring, navigate to switch » port-mirroring » ingress-src. If
source ports have been configured, the Ingress Source Ports table appears.
364
2 3
3. Delete Button
RUGGEDCOM ROX II
User Guide
Deleting an Egress Source Port