Viewing Wan Statistics - Siemens RX1500 User Manual

Chapter 3
Device Management
Parameter
alias
4. Configure a T1 or E1 line. For more information, refer to
Section 3.24.7, "Configuring an E1
5. Click Commit to save the changes or click Revert All to abort. A confirmation dialog box appears. Click OK
to proceed.
6. Click Exit Transaction or continue making changes.
Section 3.24.3

Viewing WAN Statistics

To view statistics for the WAN network, navigate to interfaces » wan » t1e1. The T1/E1 Statistics form appears.
NOTE
Some statistics are only available for physical or logical interfaces.
Figure 161: T1/E1 Statistics Form - Physical T1/E1 Interface
1. Slot 2. Port 3. Channel Number
154
Description
Disabling link-alarms will prevent alarms and LinkUp and LinkDown SNMP traps from
being sent for that interface. Link alarms may also be controlled for the whole system
under admin / alarm-cfg.
The SNMP alias name of the interface
Line".
1
2
3
4
5
4. State 5. Local
Section 3.24.6, "Configuring a T1 Line"
6. Remote 7. Mask 8. Reliability
RUGGEDCOM ROX II
User Guide
or
Viewing WAN Statistics