Clearing Alarms; Acknowledging Alarms - Siemens RX1500 User Manual

Chapter 4
System Administration
Section 4.6.2.1

Clearing Alarms

Non-conditional alarms must be cleared by the user. Conditional alarms, when configured, are cleared
automatically.
To clear a non-conditional alarm, do the following:
Navigate to admin » alarms » {alarm}, where {alarm} is the chosen alarm.
1.
2. Click clear in the menu. The Trigger Action form appears.
Figure 203: Trigger Action Form
1. Perform Button
Click Perform to clear the alarm.
3.
Section 4.6.2.2

Acknowledging Alarms

To acknowledge an alarm, do the following:
Navigate to admin » alarms » {alarm}, where {alarm} is the chosen alarm.
1.
2. Click acknowledge in the menu. The Trigger Action form appears.
192
RUGGEDCOM ROX II
User Guide
1
Clearing Alarms