RUGGEDCOM ROX II
User Guide
Section 5.25.4.2
Adding a Router Port
To add a router port for IGMP snooping, do the following:
1.
Change the mode to Edit Private or Edit Exclusive.
Navigate to switch » mcast-filtering » igmp-snooping » router-ports and click <Add router-ports>. The
2.
Key Settings form appears.
Figure 664: Key Settings Form
1. Slot Box
2. Add Button
3.
Configure the following parameter(s) as required:
Parameter
Slot
Port
4.
Click Add to add the router port.
5.
Click Commit to save the changes or click Revert All to abort. A confirmation dialog box appears. Click OK
to proceed.
6.
Click Exit Transaction or continue making changes.
Section 5.25.4.3
Deleting a Router Port
To delete a router port for IGMP snooping, do the following:
1.
Change the mode to Edit Private or Edit Exclusive.
2.
Navigate to switch » mcast-filtering » igmp-snooping » router-ports. The Router Ports table appears.
Adding a Router Port
1
Description
Synopsis: sm, lm1, lm2, lm3, lm4, lm5, lm6
The name of the module location provided on the silkscreen across the top of the
device.
The selected ports on the module installed in the indicated slot.
Chapter 5
Setup and Configuration
2
573