Deleting An Snmp Group - Siemens RX1500 User Manual

RUGGEDCOM ROX II
User Guide
Figure 286: SNMP Group Access Configuration Form
1. Read View Name List
5. Configure the following parameter(s) as required:
Parameter
Read View Name
Write View Name
Notify View Name
6. Click Commit to save the changes or click Revert All to abort. A confirmation dialog box appears. Click OK
to proceed.
7. Click Exit Transaction or continue making changes.
Section 5.11.9.3

Deleting an SNMP Group

To delete an SNMP group, do the following:
1. Change the mode to Edit Private or Edit Exclusive.
Navigate to admin » snmp » snmp-group. The SNMP Group Access Configuration table appears.
2.
Deleting an SNMP Group
1
2
3
2. Write View Name List 3. Notify View Name List
Description
Synopsis: no-view, v1-mib, restricted, all-of-mib
Default: all-of-mib
The name of the read view to which the SNMP group has access: all-of-mib, restricted,
v1-mib, or no-view.
Synopsis: no-view, v1-mib, restricted, all-of-mib
Default: all-of-mib
The name of the write view to which the SNMP group has access: all-of-mib, restricted,
v1-mib, or no-view.
Synopsis: no-view, v1-mib, restricted, all-of-mib
Default: all-of-mib
The name of the notification view to which the SNMP group has access: all-of-mib,
restricted, v1-mib, or no-view.
Chapter 5
Setup and Configuration
277