Deleting A Host Group; Managing Custom Host Group Client Configurations - Siemens RX1500 User Manual

Chapter 5
Setup and Configuration
Parameter
6. If custom configuration settings are required for the host group client, refer to
Custom Host Group Client
7. Click Commit to save the changes or click Revert All to abort. A confirmation dialog box appears. Click OK
to proceed.
8. Click Exit Transaction or continue making changes.
Section 5.15.11.5

Deleting a Host Group

To delete a host group, do the following:
1. Change the mode to Edit Private or Edit Exclusive.
2. Navigate to services » dhcpserver » host-groups. The Host Group Configuration table appears.
1
Figure 375: Host Group Configuration Table
1. Add Button 2. Edit Button
3. Click Delete next to the chosen host group.
4. Click Commit to save the changes or click Revert All to abort. A confirmation dialog box appears. Click OK
to proceed.
5. Click Exit Transaction or continue making changes.
Section 5.15.12

Managing Custom Host Group Client Configurations

Custom configuration settings can be set for each host group client.
The following sections describe how to configure and manage custom host group client configurations on a
DHCP server:
• Section 5.15.12.1, "Viewing a List of Custom Host Group Client Configurations"
• Section 5.15.12.2, "Adding Custom Host Group Client Configurations"
348
Description
The NetBIOS name server that the DHCP server offers to the client when it issues the
lease to the client.
Configurations".
2 3
3. Delete Button
RUGGEDCOM ROX II
User Guide
Section 5.15.12, "Managing
Deleting a Host Group