Siemens RX1500 User Manual page 303

RUGGEDCOM ROX II
User Guide
Figure 278: SNMPv3 User Configuration Form
1. Authentication Protocol List
5. Configure the following parameter(s) as required:
Parameter
Authentication Protocol
Authentication Key
Privacy Protocol
Privacy Key
Adding an SNMP User
1
2
3
4
2. Authentication Key Box
Description
Synopsis: none, md5, sha1
Default: none
The authentication protocol providing data integrity and authentication for SNMP
exchanges between the user and the SNMP engine.
Synopsis: The aes-cfb-128-encrypted-string works exactly like des3-cbc-encrypted-
string but AES/128bits in CFB mode is used to encrypt the string. The prefix for
encrypted values is '$4$'.
A free-text password in the format $0$<your password>. passphrase must be
minimum 8 characters long
Synopsis: none, des3cbc, aescfb128
Default: none
The symmetric privacy protocol providing data encryption and decryption for SNMP
exchanges between the user and the SNMP engine.
Synopsis: The aes-cfb-128-encrypted-string works exactly like des3-cbc-encrypted-
string but AES/128bits in CFB mode is used to encrypt the string. The prefix for
encrypted values is '$4$'.
A free-text password in the format $0$<your password>. passphrase must be
minimum 8 characters long
3. Privacy Protocol List 4. Privacy Key Box
Chapter 5
Setup and Configuration
271