Viewing Module Information - Siemens RX1500 User Manual

RUGGEDCOM ROX II
User Guide
Figure 19: Slot Hardware Table
This table provides the following information:
Parameter
slot
Order Code
Detected Module
Serial Number
Section 3.2.2

Viewing Module Information

To view information about the modules installed in the device, navigate to chassis » info. The Slot Identification
table appears.
Figure 20: Slot Identification Table
This table provides the following information:
Parameter
slot
Detected Module
Bootloader
FPGA
Viewing Module Information
Description
Synopsis: pm1, pm2, main, sm, lm1, lm2, lm3, lm4, lm5, lm6, cm, em, trnk
The slot name, as marked on the silkscreen across the top of the chassis.
The order code of the chassis as derived from the current hardware configuration.
The installed module's type specifier.
The installed module's unique serial number.
Description
Synopsis: pm1, pm2, main, sm, lm1, lm2, lm3, lm4, lm5, lm6, cm, em, trnk
The slot name, as marked on the silkscreen across the top of the chassis.
The installed module's type specifier.
The version of the ROX bootloader software on the installed module.
The version of the ROX FPGA firmware (if any) running on the installed module.
Chapter 3
Device Management
33