Configuring A Host Client - Siemens RX1500 User Manual

RUGGEDCOM ROX II
User Guide
Parameter
subnet
host-groups
6. Click Commit to save the changes or click Revert All to abort. A confirmation dialog box appears. Click OK
to proceed.
7. Click Exit Transaction or continue making changes.
Section 5.15.9.4

Configuring a Host Client

To configure a client for a host on the DHCP Server, do the following:
1. Change the mode to Edit Private or Edit Exclusive.
2. Navigate to services » dhcpserver » hosts » {host} » options » client, where {host} is the name of the
host. The Client Configuration, NIS Configuration and NetBios Configuration forms appear.
Figure 361: Client Configuration Form
1. Host Name Box
7. Static Route Box
Configuring a Host Client
Description
The subnet that this host belongs to.
The host groups that this host belongs to.
1
2
3
4
5
6
7
2. Subnet Mask Box 3. Default Route Box 4. Broadcast Box 5. Domain Box
Chapter 5
Setup and Configuration
6. DNS Server Box
337