Managing Certificates And Keys; Managing Ca Certificates And Crls; Viewing A List Of Ca Certificates And Crls - Siemens RX1500 User Manual

RUGGEDCOM ROX II
User Guide
Section 4.7

Managing Certificates and Keys

The following sections describe how to configure and manage certificates and keys on the device:
NOTE
Only admin users can read/write certificates and keys on the device.
• Section 4.7.1, "Managing CA Certificates and CRLs"
• Section 4.7.2, "Managing Private Keys"
• Section 4.7.3, "Managing Public Keys"
• Section 4.7.4, "Managing Certificates"
Section 4.7.1

Managing CA Certificates and CRLs

The following sections describe how to configure and manage CA certificates and their associated Certificate
Revocation Lists (CRLs) on the device:
• Section 4.7.1.1, "Viewing a List of CA Certificates and CRLs"
• Section 4.7.1.2, "Viewing the Status of a CA Certificate and CRL"
• Section 4.7.1.3, "Adding a CA Certificate and CRL"
• Section 4.7.1.4, "Deleting a CA Certificate and CRL"
Section 4.7.1.1

Viewing a List of CA Certificates and CRLs

To view a list of certificates issued by a Certified Authority (CA) and the Certificate Revocation Lists (CRLs)
associated with them, navigate to security » crypto » ca. If certificates have been configured, the Certificate
Authorities table appears.
Figure 206: Certificate Authorities Table
If no certificates have been configured, add certificates as needed. For more information, refer to
"Adding a CA Certificate and
Managing Certificates and Keys
CRL".
Chapter 4
System Administration
Section 4.7.1.3,
195