Deleting A Certificate - Siemens RX1500 User Manual

RUGGEDCOM ROX II
User Guide
Parameter
name
5. Click Add. The Certificate form appears.
Figure 224: Certificate Form
1. Contents Box
6. Configure the following parameter(s) as required:
Parameter
Contents
Private Key Name
CA Name
Click Commit to save the changes or click Revert All to abort. A confirmation dialog box appears. Click OK
7.
to proceed.
Click Exit Transaction or continue making changes.
8.
Section 4.7.4.4

Deleting a Certificate

To delete a certificate, do the following:
1. Change the mode to Edit Private or Edit Exclusive.
Navigate to security » crypto » certificate. The Certificate table appears.
2.
Deleting a Certificate
Description
The name of the certificate.
1
2
3
2. Private Key Name List 3. CA Certificate Name List
Description
The contents of the certificate.
The private key associated with this certificate.
The optional CA certificate for this certificate.
Chapter 4
System Administration
211