Deleting A Routing Map Filter; Deleting A Routing Map Filter Entry - Siemens RX1500 User Manual

RUGGEDCOM ROX II
User Guide
7. Configure the match rules for the route map filter. For more information, refer to
"Configuring Match
8. Configure a set for the route map filter. For more information, refer to
Click Commit to save the changes or click Revert All to abort. A confirmation dialog box appears. Click OK
9.
to proceed.
10. Click Exit Transaction or continue making changes.
Section 5.19.3.5

Deleting a Routing Map Filter

To delete a route map filter for dynamic BGP routes, do the following:
1. Change the mode to Edit Private or Edit Exclusive.
2. Navigate to routing » dynamic » bgp » filter » route-map. The Route Map table appears.
1
Figure 491: Route Map Table
1. Add Button
3. Click Delete next to the chosen filter.
4. Click Commit to save the changes or click Revert All to abort. A confirmation dialog box appears. Click OK
to proceed.
5. Click Exit Transaction or continue making changes.
Section 5.19.3.6

Deleting a Routing Map Filter Entry

To delete an entry for a route map filter, do the following:
Change the mode to Edit Private or Edit Exclusive.
1.
2. Navigate to routing » dynamic » bgp » filter » route-map » {tag} » entry, where {tag} is the tag for the
route map filter. The Route Map Entry table appears.
Deleting a Routing Map Filter
Rules".
2 3
2. Edit Button 3. Delete Button
Setup and Configuration
Section 5.19.3.7,
Section 5.19.3.8, "Configuring a
Chapter 5
Set".
443