Configuring The Raw Socket Protocol - Siemens RX1500 User Manual

Ruggedcom rox ii series
Hide thumbs Also See for RX1500:
Table of Contents

Advertisement

Chapter 3
Device Management
Parameter
retransmit
max-connection
local-port
rtu-list
5.
Click Commit to save the changes or click Revert All to abort. A confirmation dialog box appears. Click OK
to proceed.
6.
Click Exit Transaction or continue making changes.
Section 3.21.8

Configuring the Raw Socket Protocol

To configure the raw socket protocol for a serial port, do the following:
1.
Change the mode to Edit Private or Edit Exclusive.
2.
Navigate to interface » serial » {interface} » protocols » rawsocket, where {interface} is the serial port.
3.
Click the + symbol in the menu next to setrawsocket. The Raw Socket Configuration form appears.
126
Description
The amount of delay (if any) to insert after the transmissions of Modbus broadcast
messages out the serial port.
Default: 0
The number of times to retransmit the request to the RTU before giving up.
Default: 1
The maximum number of incoming connections.
Default: 502
The alternate local TCP port number. If this field is configured, a single connection
(per serial port) may be made to this alternate port number. Note that Modbus TCP
uses a default local port number of 502. There is no limit imposed on the number of
connections to the default TCP port.
The ID of the RTU(s) connected to the serial port. Specify multiple RTUs with a space
(e.g. 1 2 3 4) or a comma and space (e.g. 1, 2, 3, 4). A strictly comma-separated list
(e.g. 1,2,3,4) is not permitted.
RUGGEDCOM ROX II
User Guide
Configuring the Raw Socket Protocol

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Rx1501Rx1510Rx1511Rx1512

Table of Contents