Siemens RX1500 User Manual page 479

RUGGEDCOM ROX II
User Guide
Figure 498: Metric Form
1. Operation List
Figure 499: Set Form
1. Local Preference Box
3. On the Aggregator form, configure the following parameters as required:
Parameter
AS Number
IP Address
4. On the Metric form, configure the following parameters as required:
Parameter
operation
Configuring a Set
1
2
2. Value Box
1
2
3
4
5
2. Next Hop Box 3. Origin List
Description
AS number.
Prerequisite: as must be empty when ip is not configured.
IP address of aggregator.
Prerequisite: ip must be empty when as is not configured.
Description
Synopsis: set, add, sub
4. Originator ID Box 5. Weight Box
Chapter 5
Setup and Configuration
447