Siemens RX1500 User Manual page 511

RUGGEDCOM ROX II
User Guide
Figure 541: Route Table
The Route table provides the following information:
Parameter
Network
Type
Sub Type
Nexthop
Metric
From
Tag
Time
To view the name of the interface associated with the route, navigate to routing » status » rip » interface. The
Interface table appears.
Figure 542: Interface Table
The Interface table provides the following information:
Parameter
Name
To view the routing information advertised to the network, navigate to routing » status » rip » route. The
Advertised Route table appears.
Viewing the Status of Dynamic RIP Routes
Description
The network.
The route type.
The route sub type.
The next hop.
The metric value.
Where this route comes from.
Tag.
The route update time.
Description
The name of the interface.
Chapter 5
Setup and Configuration
479