Chapter 5
Setup and Configuration
Figure 750: L2TP Form
1. Enable L2TP Check Box
5. Closing Wait Timeout Box
3.
On the DNS Server form, configure the following parameter(s) as required:
Parameter
Primary
Secondary
4.
On the WINS Server form, configure the following parameter(s) as required:
Parameter
Primary
Secondary
5.
On the PPP Options form, configure the following parameter(s) as required:
NOTE
If Authorize Locally is not enabled, L2TP will use RADIUS authentication. For more information
about configuring RADIUS authentication for the PPP services, refer to
RADIUS Authentication for PPP
Parameter
Authorize Locally
MTU
640
1
2
3
4
5
2. Local IP Address Box
Description
The primary DNS server.
The secondary DNS server.
Description
The primary WINS server.
The secondary WINS server.
Services".
Description
Authorizes locally instead of using radius server.
Default: 1410
The Maximum Transmit Unit (MTU) or maximum packet size transmitted.
3. First IP Address Box
4. Maximum Number of Connections Box
RUGGEDCOM ROX II
User Guide
Section 4.8.2, "Configuring
Configuring L2TP Tunnels