RUGGEDCOM ROX II
User Guide
Section 2.5
Navigating the Interface
The following sections describe features of the Web interface:
•
Section 2.5.1, "Menus"
•
Section 2.5.2, "Modes"
•
Section 2.5.3, "Edit Toolbar"
•
Section 2.5.4, "Using the Navigation Menu"
•
Section 2.5.5, "Icons"
•
Section 2.5.6, "Common Controls"
Section 2.5.1
Menus
The toolbar at the top of the ROX II interface allows access to two separate menus: Configure Running and
Tools.
1
Figure 4: Toolbar
1. Configure Running Menu
• Configure Running
Click the Configure Running link to access the main ROX II interface.
• Tools
Click the Tools link to access various tools, such as a built-in CLI, system/network logs, network utilities and
administrative controls.
Section 2.5.2
Modes
There are three modes available in ROX II. The modes can be selected from the toolbar below the tabs on the
Configure Running page.
Navigating the Interface
2
2. Tools Menu
Chapter 2
Using ROX II
17