Deleting A Traffic Control Class; Managing Traffic Control Devices - Siemens RX1500 User Manual

Chapter 5
Setup and Configuration
Parameter
description
7. Click Commit to save the changes or click Revert All to abort. A confirmation dialog box appears. Click OK
to proceed.
8. Click Exit Transaction or continue making changes.
Section 5.37.4.3

Deleting a Traffic Control Class

To delete a traffic control class, do the following:
1. Change the mode to Edit Private or Edit Exclusive.
2. Navigate to qos » traffic-control » advanced-configuration » tcclasses. The Advanced Traffic Control
Classes table appears.
1
Figure 883: Advanced Traffic Control Classes Table
1. Add Button 2. Edit Button
3. Click Delete next to the chosen class.
4. Click Commit to save the changes or click Revert All to abort. A confirmation dialog box appears. Click OK
to proceed.
5. Click Exit Transaction or continue making changes.
Section 5.37.5

Managing Traffic Control Devices

Traffic control devices define devices used for traffic shaping.
NOTE
Traffic control devices can only be configured in advanced mode. For more information about setting
the traffic control mode, refer to
The following sections describe how to configure and manage traffic control devices:
• Section 5.37.5.1, "Viewing a List of Traffic Control Devices"
• Section 5.37.5.2, "Adding a Traffic Control Device"
770
Description
A description for this configuration item.
3. Delete Button
Section 5.37.1, "Enabling and Configuring Traffic
RUGGEDCOM ROX II
User Guide
2 3
Control".
Deleting a Traffic Control Class