Configuring The System Time Zone; Configuring The Local Time Settings - Siemens RX1500 User Manual

RUGGEDCOM ROX II
User Guide
4. Click Commit to save the changes or click Revert All to abort. A confirmation dialog box appears. Click OK
to proceed.
5. Click Exit Transaction or continue making changes.
Section 5.12.3

Configuring the System Time Zone

To configure the system time zone, do the following:
1. Change the mode to Edit Private or Edit Exclusive.
2. Navigate to admin. The Timezone form appears.
Figure 290: Timezone Form
1. Timezone Category Box
3. Configure the following parameter(s) as required:
Parameter
Timezone Category
Click Commit to save the changes or click Revert All to abort. A confirmation dialog box appears. Click OK
4.
to proceed.
5. Click Exit Transaction or continue making changes.
Section 5.12.4

Configuring the Local Time Settings

The local time settings configure the local clock on the device as the NTP time source.
To configure the local NTP time settings, do the following:
1. Change the mode to Edit Private or Edit Exclusive.
2. Navigate to services » time » ntp. The Local Time Settings form appears.
Configuring the System Time Zone
1
Description
Selects the time zone. Note that the Etc/GMT time zones conform to the POSIX style
and have their signs reversed from common usage. In POSIX style, zones west of GMT
have a positive sign; zones east of GMT have a negative sign.
Chapter 5
Setup and Configuration
281