Siemens RX1500 User Manual page 207

RUGGEDCOM ROX II
User Guide
2. Navigate to interface » virtualswitch and click <Add virtualswitch>. The Key Settings form appears.
Figure 184: Key Settings Form
1. Virtual Switch ID Box
3. Configure the following parameter(s) as required:
Parameter
Virtual Switch ID
4. Click Add to create the new switch. The Virtual Switch form appears.
Figure 185: Virtual Switch Form
1. Enabled Check Box
5. Configure the following parameter(s) as required:
Adding a Virtual Switch
1
2. Add Button
Description
Virtual switch ID.
1
2
3
4
5
2. Forward Delay Box 3. Alias Box 4. IP Address Source List 5. ProxyARP Check Box
Chapter 3
Device Management
2
175