Adding A Route Map Filter Entry - Siemens RX1500 User Manual

Chapter 5
Setup and Configuration
Figure 600: Key Settings Form
1. Route Map Tag Box
3. Configure the following parameter(s) as required:
Parameter
Route Map Tag
4. Click Add to create the new filter.
5. Add one or more entries. For more information, refer to
6. Click Commit to save the changes or click Revert All to abort. A confirmation dialog box appears. Click OK
to proceed.
7. Click Exit Transaction or continue making changes.
Section 5.21.6.4

Adding a Route Map Filter Entry

To add an entry for an route map filter, do the following:
1. Change the mode to Edit Private or Edit Exclusive.
2. Navigate to routing » dynamic » ospf » filter » route-map » {tag} » entry, where {tag} is the tag for the
route map filter.
3. Click <Add entry>. The Key Settings form appears.
522
1
2. Add Button
Description
Route map tag.
Section 5.21.6.4, "Adding a Route Map Filter
RUGGEDCOM ROX II
User Guide
2
Entry".
Adding a Route Map Filter Entry