Deleting A Subnet; Managing Custom Client Options For Subnets - Siemens RX1500 User Manual

Chapter 5
Setup and Configuration
Parameter
6. If custom options are required for the subnet client, refer to
Option".
7. Click Commit to save the changes or click Revert All to abort. A confirmation dialog box appears. Click OK
to proceed.
8. Click Exit Transaction or continue making changes.
Section 5.15.7.5

Deleting a Subnet

To delete a subnet, do the following:
1. Change the mode to Edit Private or Edit Exclusive.
2. Navigate to services » dhcpserver » subnet. The Subnet Configuration table appears.
1
Figure 352: Subnet Configuration Table
1. Add Button 2. Edit Button
3. Click Delete next to the chosen subnet.
Click Commit to save the changes or click Revert All to abort. A confirmation dialog box appears. Click OK
4.
to proceed.
5. Click Exit Transaction or continue making changes.
Section 5.15.8

Managing Custom Client Options for Subnets

The following sections describe how to configure and manage custom client options for a DHCP subnet:
• Section 5.15.8.1, "Viewing a List of Custom Client Options"
• Section 5.15.8.2, "Adding a Custom Client Option"
• Section 5.15.8.3, "Deleting a Custom Client Option"
330
Description
The NetBIOS name server that the DHCP server offers to the client when it issues the
lease to the client.
2 3
3. Delete Button
Section 5.15.8.2, "Adding a Custom Client
RUGGEDCOM ROX II
User Guide
Deleting a Subnet