Adding A Repository - Siemens RX1500 User Manual

RUGGEDCOM ROX II
User Guide
Parameter
app-name
On the Trigger Action form, click Perform. The connection results are displayed.
3.
Section 3.12.5.3

Adding a Repository

To add an application repository, do the following:
NOTE
An application repository must be configured before an application can be installed or upgraded.
1. Change the mode to Edit Private or Edit Exclusive.
2. Navigate to admin » software-upgrade » apps » repository and click <Add repository>. The Key
Settings form appears.
Figure 71: Key Settings Form
1. App Name Box
3. Configure the following parameter(s) as required:
Parameter
app-name
4. Click Add to create the repository connection. The Repository form appears.
Adding a Repository
Description
The name of a configured app repository as it appears in the repository configuration. To
check more than one repository, use a comma-separated list.
1
2. Add Button
Description
The name of the app to upgrade or install. This name must be accurate. Consult the
release notes for the app.
Chapter 3
Device Management
2
73