Chapter 5
Setup and Configuration
If no GSM profiles have been configured, add profiles as needed. For more information, refer to
"Adding a GSM
Profile".
Section 5.13.2.2
Adding a GSM Profile
To add a GSM profile for the celullar modem interface, do the following:
1.
Change the mode to Edit Private or Edit Exclusive.
2.
Navigate to global » cellular » profiles » gsm and click <Add gsm>. The Key Settings form appears.
Figure 320: Key Settings Form
1. Name Box
2. Add Button
3.
Configure the following parameter(s) as required:
Parameter
name
4.
Click Add to create the new profile. The Cellular Network Configuration and GSM PPP Configuration
forms appear.
Figure 321: Cellular Network Configuration Form
1. Access Point Name Box
304
1
Description
Create a GSM profile name.
1
2
2. Dial String Box
RUGGEDCOM ROX II
User Guide
Section 5.13.2.2,
2
Adding a GSM Profile