Adding A User - Siemens RX1500 User Manual

Chapter 4
System Administration
Section 4.9.2

Adding a User

To add a new user account, do the following:
1. Change the mode to Edit Private or Edit Exclusive.
2. Navigate to admin » users and click <Add userid> in the menu. The Key Settings form appears.
Figure 233: Key Settings Form
1. Name Box 2. Add Button
3. Configure the following parameter(s) as required:
Parameter
name
4. Click Add to create the new user account. The Users form appears.
Figure 234: Users Form
1. Password Box
5. Under Role, select the user's role (i.e. administrator, operator or guest).
NOTE
The Password box displays a hashed version of the user's current password/passphrase. If a
password/passphrase is not configured, the box is blank. Setting the user password/passphrase is
done elsewhere in ROX II.
220
Description
The name of the user.
2. Role List
RUGGEDCOM ROX II
User Guide
Adding a User