RUGGEDCOM ROX II
User Guide
Section 5.26.6.3
Deleting a VRRP Instance
To delete a VRRP instance, do the following:
1.
Change the mode to Edit Private or Edit Exclusive.
Navigate to services » vrrp » instance. The VRRP Instance table appears.
2.
1
Figure 688: VRRP Instance Table
1. Add Button
Click Delete next to the chosen instance.
3.
4.
Click Commit to save the changes or click Revert All to abort. A confirmation dialog box appears. Click OK
to proceed.
5.
Click Exit Transaction or continue making changes.
Section 5.26.7
Managing VRRP Monitors
A VRRP monitor selects an extra interface to monitor. If the interface becomes unavailable, the router will
relinquish control of the gateway IP address to another VRRP Router.
The following sections describe how to configure and manage VRRP monitors:
•
Section 5.26.7.1, "Viewing a List of VRRP Monitors"
•
Section 5.26.7.2, "Adding a VRRP Monitor"
•
Section 5.26.7.3, "Deleting a VRRP Monitor"
Section 5.26.7.1
Viewing a List of VRRP Monitors
To view a list of VRRP monitors, navigate to services » vrrp » instance » {name} » monitor, where {name} is
the name of the VRRP instance. If monitors have been configured, the Monitor Interface table appears.
Deleting a VRRP Instance
2. Edit Button
3. Delete Button
Chapter 5
Setup and Configuration
2
3
593