Viewing The Ntp Service Status - Siemens RX1500 User Manual

RUGGEDCOM ROX II
User Guide
4. Click Commit to save the changes or click Revert All to abort. A confirmation dialog box appears. Click OK
to proceed.
5. Click Exit Transaction or continue making changes.
Section 5.12.8

Viewing the NTP Service Status

To view the status of the NTP service, do the following:
1. Make sure the NTP service is enabled. For more information, refer to
NTP Service".
2. Navigate to services » time » ntp and click ntp-status in the menu. The Trigger Action form appears.
Figure 295: Trigger Action Form
1. Perform Button
3. Click Perform. The NTP Service Status form appears.
Figure 296: NTP Service Status Form
This form provides the following information:
Viewing the NTP Service Status
Setup and Configuration
Section 5.12.7, "Enabling/Disabling the
1
Chapter 5
285