RUGGEDCOM ROX II
User Guide
Figure 899: Key Settings Form
1. VLAN QoS Box
4.
Configure the following parameter(s) as required:
Parameter
VLAN QoS
5.
Click Add to create the new QoS Map. The Qosmap form appears.
Figure 900: Qosmap Form
1. Ingress Mark Box
6.
Configure the following parameter(s) as required:
Parameter
Ingress Mark
7.
Add an egress mark for the QoS map. For more information, refer to
Mark".
8.
Click Commit to save the changes or click Revert All to abort. A confirmation dialog box appears. Click OK
to proceed.
9.
Click Exit Transaction or continue making changes.
Section 5.37.7.3
Deleting a QoS Map
To delete a QoS map for a VLAN connection, do the following:
Deleting a QoS Map
1
2. Add Button
Description
VLAN QoS, which is the priority in the VLAN header.
1
Description
Map the ingress to a mark.
Setup and Configuration
2
Section 5.37.8.2, "Adding an Egress
Chapter 5
783