Viewing A List Of Key Chains; Viewing A List Of Keys; Adding A Key Chain - Siemens RX1500 User Manual

Chapter 5
Setup and Configuration
• Section 5.20.9.5, "Deleting a Key Chain"
• Section 5.20.9.6, "Deleting a Key"
Section 5.20.9.1

Viewing a List of Key Chains

To view a list of key chains for dynamic RIP routes, navigate to routing » dynamic » rip » key-chain. If key
chains have been configured, the Key Chain Management table appears.
Figure 566: Key Chain Management Table
If no key chains have been configured, add key chains as needed. For more information, refer to
Section 5.20.9.3, "Adding a Key
Section 5.20.9.2

Viewing a List of Keys

To view a list of keys in a key chain, navigate to routing » dynamic » rip » key-chain » {name} » key, where
{name} is the name of the key chain. If keys have been configured, the Key Configuration table appears.
Figure 567: Key Configuration Table
If no keys have been configured, add keys as needed. For more information, refer to
Key".
Section 5.20.9.3

Adding a Key Chain

To add a key chain for dynamic RIP routes, do the following:
1. Change the mode to Edit Private or Edit Exclusive.
2. Navigate to routing » dynamic » rip » key-chain and click <Add key-chain>. The Key Settings form
appears.
496
Chain".
RUGGEDCOM ROX II
User Guide
Section 5.20.9.4, "Adding a
Viewing a List of Key Chains