Managing The Prefix List Distribution; Viewing A List Of Prefix List Distribution Paths - Siemens RX1500 User Manual

RUGGEDCOM ROX II
User Guide
1
Figure 561: Neighbor Table
1. Add Button
3. Click Delete next to the chosen neighbor.
Click Commit to save the changes or click Revert All to abort. A confirmation dialog box appears. Click OK
4.
to proceed.
Click Exit Transaction or continue making changes.
5.
Section 5.20.8

Managing the Prefix List Distribution

The following sections describe how to configure and manage the prefix list distribution:
• Section 5.20.8.1, "Viewing a List of Prefix List Distribution Paths"
• Section 5.20.8.2, "Adding a Prefix List Distribution Path"
• Section 5.20.8.3, "Deleting a Prefix List Distribution Path"
Section 5.20.8.1

Viewing a List of Prefix List Distribution Paths

To view a list of prefix list distribution paths for dynamic RIP routes, navigate to routing » dynamic » rip »
distribute-prefix-list. If distribution paths have been configured, the Distribute Prefix List table appears.
Figure 562: Distribute Prefix List Table
If no prefix list distribution paths have been configured, add distribution paths as needed. For more information,
refer to Section 5.20.8.2, "Adding a Prefix List Distribution
Managing the Prefix List Distribution
2 3
2. Edit Button 3. Delete Button
Path".
Chapter 5
Setup and Configuration
493