Viewing The Status Of The Forwarding Table; Enabling/Disabling Mpls Routing - Siemens RX1500 User Manual

RUGGEDCOM ROX II
User Guide
Section 5.39.2

Viewing the Status of the Forwarding Table

To view the status of the forwarding table on the device, navigate to mpls » status » forwarding-table, the
MPLS Forwarding Table appears.
Figure 924: MPLS Forwarding Table
This table provides the following information:
Parameter
Local Label
Outgoing Label
Prefix
Outgoing Interface
Next Hop
Up Time
Section 5.39.3

Enabling/Disabling MPLS Routing

To enable MPLS routing, do the following:
1. Change the mode to Edit Private or Edit Exclusive.
2. Navigate to mpls. The Multiprotocol Label Switching (MPLS) Configuration form appears.
Viewing the Status of the Forwarding Table
Description
The incoming (local) label
The outgoing (remote) label.
The destination address prefix.
The outgoing interface.
The destination next hop router.
The time this entry has been up.
Chapter 5
Setup and Configuration
803