Deleting A Prefix List; Deleting A Prefix Entry - Siemens RX1500 User Manual

Chapter 5
Setup and Configuration
Parameter
Network
Maximum prefix to mask for subnet
Minimum prefix to mask for subnet
Click Commit to save the changes or click Revert All to abort. A confirmation dialog box appears. Click OK
7.
to proceed.
Click Exit Transaction or continue making changes.
8.
Section 5.19.5.5

Deleting a Prefix List

To delete a prefix list for dynamic BGP routes, do the following:
Change the mode to Edit Private or Edit Exclusive.
1.
2. Navigate to routing » dynamic » bgp » filter » prefix-list. The Prefix List table appears.
1
Figure 512: Prefix List Table
1. Add Button 2. Edit Button
NOTE
Deleting a prefix list removes all associate prefix entries as well.
Click Delete next to the chosen prefix list.
3.
4. Click Commit to save the changes or click Revert All to abort. A confirmation dialog box appears. Click OK
to proceed.
5. Click Exit Transaction or continue making changes.
Section 5.19.5.6

Deleting a Prefix Entry

To delete an entry for a dynamic BGP prefix list, do the following:
456
Description
Default: permit
Action.
Network (xxx.xxx.xxx.xxx/xx).
The maximum prefix length to match ipaddress within subnet.
The minimum prefix length to match ipaddress within subnet.
2 3
3. Delete Button
RUGGEDCOM ROX II
User Guide
Deleting a Prefix List