Deleting A Priority; Managing Dscp To Cos Maps; Viewing A List Of Dscps - Siemens RX1500 User Manual

Chapter 5
Setup and Configuration
Section 5.32.2.3

Deleting a Priority

To delete a priority, do the following:
Change the mode to Edit Private or Edit Exclusive.
1.
2. Navigate to switch » class-of-service » priority-to-cos. The Priority to CoS Mapping table appears.
1
Figure 802: Priority to CoS Mapping Table
1. Add Button 2. Edit Button
3. Click Delete next to the chosen priority.
4. Click Commit to save the changes or click Revert All to abort. A confirmation dialog box appears. Click OK
to proceed.
Click Exit Transaction or continue making changes.
5.
Section 5.32.3

Managing DSCP to CoS Maps

Assigning CoS to different values of the Differentiated Services Code Point (DSCP) field in the IP header of
received packets is done by defining DSCP-to-CoS mapping table entries.
The following sections describe how to configure and manage DSCP-to-CoS mapping:
• Section 5.32.3.1, "Viewing a List of DSCPs"
• Section 5.32.3.2, "Adding a DSCP"
• Section 5.32.3.3, "Deleting a DSCP"
Section 5.32.3.1

Viewing a List of DSCPs

To view a list of DSCPs, navigate to switch » class-of-service » dscp-to-cos. If DSCPs have been configured,
the DSCP to CoS Mapping table appears.
684
2 3
3. Delete Button
RUGGEDCOM ROX II
User Guide
Deleting a Priority