Enabling/Disabling The Xpath Trace Log - Siemens RX1500 User Manual

RUGGEDCOM ROX II
User Guide
Parameter
Enabled
Click Commit to save the changes or click Revert All to abort. A confirmation dialog box appears. Click OK
4.
to proceed.
Click Exit Transaction or continue making changes.
5.
Section 3.9.3.5

Enabling/Disabling the XPATH Trace Log

The XPATH trace log records internal events related to XPATH routines that require interaction with an XPATH
component.
CAUTION!
Configuration hazard – risk of reduced performance. Enabling diagnostic logging will significantly affect
the performance of ROX II. Only enable diagnostic logging when directed by Siemens.
To enable or disable the XPATH Trace log, do the following:
1. Change the mode to Edit Private or Edit Exclusive.
Navigate to admin » logging » diagnostics. The XPATH Trace Log form appears.
2.
Figure 39: XPATH Trace Log Form
1. Enabled Check Box
3. Configure the following parameter(s) as required:
Parameter
Enabled
4. Click Commit to save the changes or click Revert All to abort. A confirmation dialog box appears. Click OK
to proceed.
5. Click Exit Transaction or continue making changes.
Enabling/Disabling the XPATH Trace Log
Description
Default: false
Enables/disables NETCONF Trace logging to netconf-trace.log.
Description
Default: false
Enables/disables XPATH Trace logging to the xpath-trace.log.
Chapter 3
Device Management
49