Siemens RX1500 User Manual page 86

Chapter 3
Device Management
Figure 46: Key Settings Form
1. Name Box 2. Add Button
4. Configure the following parameter(s) as required:
Parameter
name
5. Click Add. The Remote Server Selector form appears.
Figure 47: Remote Server Selector Form
1. Negate Check Box
6. Configure the following parameter(s) as required:
54
Description
The log selector identifier. Enter an integer greater than 0; up to 8 selectors can be
added. The log selector determines which subsystem messages are included in the log.
2. Comparison List 3. Level List 4. Facility List 5. Add Button
RUGGEDCOM ROX II
User Guide
Adding a Remote Server Selector