Deleting An Egress Mark - Siemens RX1500 User Manual

Chapter 5
Setup and Configuration
Parameter
Egress Mark
5. Click Add to create the new egress mark.
6. Click Commit to save the changes or click Revert All to abort. A confirmation dialog box appears. Click OK
to proceed.
7. Click Exit Transaction or continue making changes.
Section 5.37.8.3

Deleting an Egress Mark

To delete an egress mark for a QoS map, do the following:
1. Change the mode to Edit Private or Edit Exclusive.
2. Navigate to interface » {interface} » {interface-name} » vlan » {id} » qosmap » {priority} » egress,
where:
• {interface} is the type of interface (either eth or virtualswitch)
• {interface-name} is the name of the interface
• {id} is the ID given to the VLAN
• {priority} is the priority assigned to the QoS map
The Egress Marks Settings table appears.
1
Figure 904: Egress Marks Settings Table
1. Add Button 2. Edit Button
3. Click Delete next to the chosen egress mark.
4. Click Commit to save the changes or click Revert All to abort. A confirmation dialog box appears. Click OK
to proceed.
5. Click Exit Transaction or continue making changes.
786
Description
The mark value.
2 3
3. Delete Button
RUGGEDCOM ROX II
User Guide
Deleting an Egress Mark