Configuring Radius Authentication For Ppp Services - Siemens RX1500 User Manual

RUGGEDCOM ROX II
User Guide
Figure 227: Secondary Radius Server Form
1. Address Box
3. In both forms, configure the following parameters as required:
Parameter
address
port-udp
password
4. Click Commit to save the changes or click Revert All to abort. A confirmation dialog box appears. Click OK
to proceed.
5. Click Exit Transaction or continue making changes.
Section 4.8.2

Configuring RADIUS Authentication for PPP Services

To configure RADIUS authentication for PPP services, do the following:
IMPORTANT!
Passwords are case-sensitive.
Configuring RADIUS Authentication for PPP Services
1
2
3
2. Port UDP Box 3. Password Box
Description
Synopsis: The ip-address type represents an IP address and is IP version neutral.
The format of the textual representations implies the IP version.
The IP address of the server.
Default: 1812
The network port of the server.
Synopsis: The aes-cfb-128-encrypted-string works exactly like des3-cbc-encrypted-
string but AES/128bits in CFB mode is used to encrypt the string. The prefix for
encrypted values is '$4$'.
The password of the RADIUS server.
Chapter 4
System Administration
215