Managing Gateways For Static Routes; Configuring Gateways For Ipv6 Static Routes - Siemens RX1500 User Manual

Ruggedcom rox ii series
Hide thumbs Also See for RX1500:
Table of Contents

Advertisement

Chapter 5
Setup and Configuration
Parameter
5.
Click Commit to save the changes or click Revert All to abort. A confirmation dialog box appears. Click OK
to proceed.
6.
Click Exit Transaction or continue making changes.
Section 5.22.6

Managing Gateways for Static Routes

The following sections describe how to configure and manage gateways for static routes:
Section 5.22.6.1, "Configuring Gateways for IPv6 Static Routes"
Section 5.22.6.2, "Viewing a List of Gateways for IPv4 Static Routes"
Section 5.22.6.3, "Adding a Gateway for an IPv4 Static Route"
Section 5.22.6.4, "Deleting a Gateway for an IPv4 Static Route"
Section 5.22.6.1

Configuring Gateways for IPv6 Static Routes

To configure a gateway address for an IPv6 static route, do the following:
1.
Change the mode to Edit Private or Edit Exclusive.
2.
Navigate to routing » static » ipv6 » {subnet}, where subnet is the subnet (network/prefix) of the static
route.
3.
Click the + symbol in the menu next to via. The Static Route Using Gateway form appears
Figure 629: Static Route Using Gateway Form
1. Gateway Address Box
4.
Configure the following parameter(s) as required:
Parameter
Gateway Address
542
Description
The distance for this static route's blackhole. Default is 1.
1
2
2. Distance Box
Description
The gateway for the static route.
RUGGEDCOM ROX II
User Guide
Managing Gateways for Static Routes

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Rx1501Rx1510Rx1511Rx1512

Table of Contents