Siemens RX1500 User Manual page 379

RUGGEDCOM ROX II
User Guide
Figure 374: NetBios Configuration Form
1. Scope Box 2. Net Server Box
3. On the Client Configuration form, configure the following parameters as required:
Parameter
hostname
subnetmask
default-route
broadcast
domain
dns-server
static-route
4. On the NIS Configuration form, configure the following parameters as required:
Parameter
server
domain
5. On the NetBios Configuration form, configure the following parameters as required:
Parameter
scope
nameserver
Configuring a Host Group Client
1
2
Description
The unique name to refer to the host within a DHCP configuration.
Subnet mask
The default route that the server offers to the client when it issues the lease to the client.
The broadcast address that the server offers to the client when it issues the lease to the
client.
The domain name that the server offers to the client when it issues the lease to the
client.
The domain name server that the server offers to the client when it issues the lease to
the client.
The static route that the DHCP server offers to the client when it issues the lease to the
client.
Description
The NIS server address that the DHCP server offers to the client when it issues the
lease to the client.
The NIS domain name that the DHCP server offers to the client when it issues the lease
to the client.
Description
Default: netbios
The NetBIOS scope that the DHCP server offers to the client when it issues the lease to
the client.
Default: 127.0.0.1
Chapter 5
Setup and Configuration
347