Siemens RX1500 User Manual page 131

RUGGEDCOM ROX II
User Guide
Parameter
Auto Learn
Shutdown Time
Shutdown Enable
On the 802.1x Parameters form, configure the following parameter(s) as required:
4.
Parameter
Transmission Period
quiet-period
Reauthorization
reauth-period
Reauthorization Max Attempts
Supplicant Timeout
Server Timeout
Max Requests
5. If IEEE 802.1x standard authentication or IEEE 802.1x with MAC authentication is selected, configure a
primary and secondary RADIUS server. For more information, refer to
Authentication for Switched Ethernet
Click Commit to save the changes or click Revert All to abort. A confirmation dialog box appears. Click OK
6.
to proceed.
Click Exit Transaction or continue making changes.
7.
Configuring Port Security
Description
• IEEE 802.1X with MAC Authentication, also known as MAC-Authentication Bypass.
With this method, the device can authenticate clients based on the client's MAC
address, if IEEE 802.1X authentication times out.
Default: 0
The maximum number of MAC addresses that can be dynamically learned on the port.
If there are static addresses configured on the port, the actual number of addresses
allowed to be learned is this number minus the number of the static MAC addresses.
How long to shut down an interface if a security violation occurs.
Enables/disables administative shutdown if a security violation occurs.
Description
Default: 30
IEEE 802.1X PAE (Port Access Entity) parameters
Default: 60
The period of time not to attempt to acquire a supplicant after the authorization session
failed.
Enables or disables periodic reauthentication
Default: 3600
The time between successive reauthentications of the supplicant.
Default: 2
The number of reauthentication attempts that are permitted before the port becomes
unauthorized.
Default: 30
The time to wait for the supplicant's response to the authentication server's EAP packet.
Default: 30
The time to wait for the authentication server's response to the supplicant's EAP packet.
Default: 2
The maximum number of times to retransmit the authentication server's EAP Request
packet to the supplicant before the authentication session times out.
Ports".
Device Management
Section 4.8.3, "Configuring RADIUS
Chapter 3
99