Deleting A Redistribution Metric - Siemens RX1500 User Manual

RUGGEDCOM ROX II
User Guide
Figure 576: Key Settings Form
1. Redistribute Type List
3. Configure the following parameter(s) as required:
Parameter
Redistribute Type
4. Click Add to add the metric. The Redistribute Route from Other Protocols form appears.
Figure 577: Redistribute Route from Other Protocols Form
1. Metric Box
Click Commit to save the changes or click Revert All to abort. A confirmation dialog box appears. Click OK
5.
to proceed.
Click Exit Transaction or continue making changes.
6.
Section 5.20.10.3

Deleting a Redistribution Metric

To delete a redistribution metric for dynamic RIP routes, do the following:
1. Change the mode to Edit Private or Edit Exclusive.
Navigate to routing » dynamic » rip » redistribute. The Redistribute Route from Other Protocols table
2.
appears.
Deleting a Redistribution Metric
1
2. Add Button
Description
Synopsis: kernel, static, connected, ospf, bgp
Redistribute route type.
1
Chapter 5
Setup and Configuration
2
503