Deleting An Ethernet Trunk Port; Managing Cellular Modem Interfaces - Siemens RX1500 User Manual

Chapter 3
Device Management
Parameter
Trunk Slot
Trunk Port
5. Click Add to create the new trunk port.
6. Click Commit to save the changes or click Revert All to abort. A confirmation dialog box appears. Click OK
to proceed.
7. Click Exit Transaction or continue making changes.
Section 3.22.4.3

Deleting an Ethernet Trunk Port

To delete an Ethernet trunk port, do the following:
1. Change the mode to Edit Private or Edit Exclusive.
2. Navigate to interface » trunks » {id} » trunk-ports, where {id} is the ID given to the interface. The Trunk
Ports table appears.
1
Figure 144: Trunk Ports Table
1. Add Button 2. Edit Button
3. Click Delete next to the chosen trunk port.
Click Commit to save the changes or click Revert All to abort. A confirmation dialog box appears. Click OK
4.
to proceed.
Click Exit Transaction or continue making changes.
5.
Section 3.23

Managing Cellular Modem Interfaces

The following sections describe how to configure and manage cellular modem interfaces:
• Section 3.23.1, "Viewing a List of Cellular Modem Interfaces"
140
Description
Synopsis: sm, lm1, lm2, lm3, lm4, lm5, lm6
The name of the module location provided on the silkscreen across the top of the
device.
The selected ports on the module installed in the indicated slot.
2 3
3. Delete Button
RUGGEDCOM ROX II
User Guide
Deleting an Ethernet Trunk Port